Indoor Decoration Plywood ASTM Plant Formaldehyde Emission Test Chamber

• Customization: Available
• After-sales Service: 1 Year
• Power Supply: 220V
• Model NO.: 1000L
• Volume: 1m³
• Temp. Range: 15ºC-40ºC
• Temp. Deviation: ±0.5ºC
• Power: AC 220V 50Hz
• Transport Package: Wood
• Specification: 1000L
• Trademark: HUANYI
• Origin: China
• HS Code: 9031809090
• Production Capacity: 200

Product Description

Product Description

1.Purpose and scope of use

The formaldehyde climate chamber is a formaldehyde emission test equipment developed according to the national standard GB18580-2017, LY/T1612-2004 American standard ASTMD6007-2, European standard EN717-1, international standard ISO16000-9, ISO12460, German standard DIN EN 16516-2018, applicable It is used for the determination of formaldehyde emission of various wood-based panels, composite wood floors, carpets, carpet pads and carpet adhesives, furniture, automotive interiors, building decoration materials and other materials, and the constant temperature and humidity balance of wood or wood-based panels It can also be used to detect volatile harmful gases in other building materials.

The amount of formaldehyde released from wood-based panels is an important indicator to measure the quality of wood-based panels, which is related to the environmental pollution of products and the impact on human health. The 1 m3 formaldehyde emission climatic chamber detection method is a standard method for the detection of formaldehyde emission of indoor decoration and decoration materials commonly used outside. Its characteristic is to simulate the indoor climate environment and the detection results are closer to reality, so it is true and reliable.

The intelligent humidity control of this equipment adopts the dry-wet and dew point method and the intelligent integrated wet-control method:
Dry-wet and dew point intelligent integrated humidity control method: Combining the advantages of dry-wet method and dew-point method, the set humidity can be quickly reached within one hour by the dry-wet method, and when the set humidity is reached, it will automatically switch to the dew point method to assist humidity control. Very stable effect, the humidity fluctuation basically does not exceed 1%, far better than the 3% required by the standard.

2 Power supply conditions
a) Voltage: 220±22V
b) Frequency: 50±0.5Hz
c) Current: not less than 16A

3 Water supply conditions
Distilled water with water temperature not higher than 30ºC

4 The placement location must ensure that it has good ventilation and heat dissipation conditions (at least 0.5m away from the wall).

Specification

Inner volume	(1.0±0.02)m³
Test temperature range	(10-40)ºC, accuracy:±0.5ºC, Resolution 0.1ºC, Adjustable
test humidity adjustable range	(30-80)%, accuracy:±3%, Resolution 0.1%, Adjustable
Air exchange	(0.1-2)m/s, accuracy:±0.05 m/s, Adjustable
Air speed	(0.2-2)m³/h, accuracy: ±5%, Adjustable
Leakproofness	1KPa relative pressure, leakage rate<10-3×1m³/min, import and export air differ<1%
background levels	formaldehyde≤0.006mg/m³
Adiabaticity	The wall and door of the climate box is effectively thermal insulation
Noise	less than 60dB
Continuous working hours	not less than 40 days
monitoring parameter	Monitoring the temperature and humidity, air discharge, switching time, working time, data can be transferred and stored
Method of controlling humidity	The dew point control method is adopted to control the relative humidity, the humidity is stable, and the fluctuation range <3%.rh. no water appear on the inside
Out dimension (W*D*H)	1630 x 1200 x 1850mm