Fast Temperature Change Damp Heat Test Chamber

Product Details
Customization: Available
After-sales Service: 1 Year
Power Supply: 220/380V

360° Virtual Tour

Diamond Member Since 2019

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
9900000 RMB
Plant Area
>2000 square meters
  • Fast Temperature Change Damp Heat Test Chamber
  • Fast Temperature Change Damp Heat Test Chamber
  • Fast Temperature Change Damp Heat Test Chamber
  • Fast Temperature Change Damp Heat Test Chamber
  • Fast Temperature Change Damp Heat Test Chamber
  • Fast Temperature Change Damp Heat Test Chamber
Find Similar Products

Basic Info.

Model NO.
HYQT-80SL5
Volume
80L/150L/225L/408L/1000L
Temp. Range
-70ºC-150ºC
Temp. Fluctuation
±0.5ºC
Temp. Deviation
±2.0ºC
Temp. Uniformity
≤2.0ºC
Supply
AC 380V±10% 50Hz
Cooling Mode
Wind-Cooled/Water-Cooled
Transport Package
Wooden Box
Specification
Multiple
Trademark
Huanyi
Origin
Dongguan

Product Description


The relay of the fast temperature change test box is applicable to different central signal wiring modes. No matter it is connected to the positive or negative terminal of the power supply, there is no need to set jumper. The power consumption of the relay is very small, and no external resistance is required. The relay completely excludes the traditional current differential principle and adopts the method of intelligent comparison of current amplitude throughout the alarm cycle. It has a memory feature, that is, it memorizes the amplitude of the current before and after the arrival of the alarm current, compares the amplitude of the current before and after the arrival of the alarm current. If there is a long signal overlapping with the short signal, it can ensure correct alarm as long as the long signal does not return during the delay period of the warning signal, Long signals will not be "erased" by SMS.
Fast Temperature Change Damp Heat Test Chamber
Specification
Model HYH-80D HYH-150D HYH-225D HYH-408D HYH-800D HYH-1000D
Inner Size(cm)
(W x D x H)
40×50 ×40 50×60×50 50×75×60 60×85×80 80×100×100 100×100×100
Outer Size(cm)
(W x D x H)
70x95x150 105x110x170 105x120x185 115x140x195 155x140x210 155x160x210
Weight(kg) 160kg 220kg 300kg 550kg 960kg 1100kg
Standard parameter Temp.control method PID temperature humidity balance control
Temp.Range -70ºC ~150ºC
Humid.Range 20%~98%RH
Temp.Uniformity ±2ºC
Temp.Fluctuation ±0.5ºC
Humid.Uniformity ±3%R·H
Heating Rate ≥3ºC/min
Cooling Rate ≥1~1.5ºC/min
Cooling Method Air cooled
Material Inner SUS# 304 stainless steel 1.2mm
Outer Cold-roll steel sheet with Electrostatic coating or SUS# 304 stainless steel
Insulation Ultra-fine glass fiber insulation cotton / rigid polyurethane foam
Configuration Heater Ceramic heater
Humidifier Stainless steel armour humidifier
Cooling Mechnical single stage refrigeration
Compressor Original imported French Tecumseh hermetic compressor
Other function Running error ; self diagnosis ; breakdown tips ; auto-power off
Safety protection Protection for compressor Overload protection;overheat protection ; over pressure protection
Protection for chamber dry burn alarm;water shortage alarm;electric leakage protection;
Protection for fan Overload protection;phase sequence protection
Programmable
Controller
 
Brand Standard TATO 7" LCD touch screen , optional Sanwon TEMI series
Language Standard English interface, other language is optional
Resolution Temperature:0.01ºC;Humidity:0.1%R·H
Program capacity 269patterns/ 13450 segments
Running method Fix mode & program mode
Power Supply AC 380V @50Hz  three phase

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier