| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Power Supply: | 220V/360V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Inner tank volume | 80L | 100L | 150L | 225L | 408L | 800L | 1000L | |||
| workroom dimension(DWH)(cm) | 40×40×50 | 40×50×50 | 50×50×60 | 50×60×75 | 60×80×85 | 80×100×100 | 100×100×100 | |||
| weight | 180 | 200 | 250 | 300 | 550 | 960 | 1100 | |||
| performance | Temperature regulation Humidity control mode |
Intelligent PID Regulation of Balanced Temperature and Humidity Regulation | ||||||||
| temperature range | The highest test temperature is 150 ºC. Minimum test temperature Type A, 0 ºC, Type B-20ºC C-40ºC ,D-70 ºC |
|||||||||
| Humidity ranges | 20%~98%R·H | |||||||||
| Temperature uniformity | ±2ºC | |||||||||
| Temperature fluctuation | ±0.5ºC | |||||||||
| Humidity uniformity | ±3%R·H | |||||||||
| Heating up rate | ≥2ºC/min | |||||||||
| Cooling rate | ≥1~1.5ºC/min | |||||||||
| Material | Inner case material | SUS304 mirror stainless steel | ||||||||
| Shell material | SUS304 Abrasive surface stainless steel-tin Cold-rolled steel sheet with rust-proof treatment |
|||||||||
| Insulation breaking heat | Polyurethane Foamed Plastic Composite Assembly Board | |||||||||
| Control system | heater | Nickel-chromium alloy electric heater | ||||||||
| Humidifier | Stainless steel armoured humidifier | |||||||||
| Air intake system | Centrifugal fan | |||||||||
| Refrigeration mode | Mechanical single stage refrigeration | |||||||||
| Cooling mode | Air cooling | |||||||||
| Refrigeration compressor | Imported Enclosed Compressor (Tai kang, France) | |||||||||
| Refrigeration heat ex-changer | Fin heat ex-changer,,Stainless steel brazed plate heat ex-changer | |||||||||
| Operation interface | Imported Single Point Controller | |||||||||
| Operating mode | Constant operation | |||||||||
| Program memory capacity | Memorable last set operating temperature and humidity | |||||||||
| resolution ratio | Temperature:0.01ºC;Humidity:0.1%R·H | |||||||||
| input | PT100 or T type thermo couple | |||||||||
| Communication function | no | |||||||||
| Printing function | Yokogawa 6-point recorder, Japan (optional) | |||||||||
| Standard configuration | One observation window, one test hole (60mm); The sample rack has two layers, one illumination lamp in the box and one water supply chamber. Wet bulb with meteorological belt; Castors four. |
|||||||||
| Safety device | Overheat protector, dry burning protector (humidification system) water shortage protector, leakage protector, compressor over pressure, overload, Over current protector, fan overload protector, phase sequence protector. |
|||||||||
| Ancillary function | Upper and lower limit alarm, self-diagnosis, alarm display (cause of failure), timing device (automatic shutdown) | |||||||||
){kind=link}